Publication result detail
Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand
ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; KOCÁB, D.
Original Title
Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand
English Title
Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand
Type
Abstract
Original Abstract
This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurements
English abstract
This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurements
Keywords
alkali-activated slag, frcature test, mortar
Key words in English
alkali-activated slag, frcature test, mortar
Authors
ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; KOCÁB, D.
RIV year
2020
Released
13.11.2019
Publisher
Technická univerzita v Košiciach
Location
Košice
ISBN
978-80-553-3413-4
Book
SPACE 2019
Pages from
1
Pages to
1
Pages count
1
BibTex
@misc{BUT160104,
author="Hana {Šimonová} and Barbara {Kucharczyková} and Vlastimil {Bílek} and Dalibor {Kocáb}",
title="Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand",
booktitle="SPACE 2019",
year="2019",
pages="1--1",
publisher="Technická univerzita v Košiciach",
address="Košice",
isbn="978-80-553-3413-4",
note="Abstract"
}