Cílem projektu je podpora studentských výzkumných aktivit realizovaných v oblasti nanotechnologií a nových materiálů. Z tohoto projektu budou podpořeni studenti doktorského studijního prohramu Pokročilé materiály a nanovědy na CEITEC VUT.

STI-S-17-4754

Czech

Vrba Radimír, prof. Ing., CSc. - principal person responsible
Břínek Adam, Ing. - fellow researcher
Částková Klára, doc. Ing., Ph.D. - fellow researcher
Čechal Jan, prof. Ing., Ph.D. - fellow researcher
Čelko Ladislav, doc. Ing., Ph.D. - fellow researcher
Dyčková Lucie, Ing. - fellow researcher
Horký Michal, Ing., Ph.D. - fellow researcher
Hutař Pavel, prof. Ing., Ph.D. - fellow researcher
Jančář Josef, prof. RNDr., CSc. - fellow researcher
Kachtík Lukáš, Ing., Ph.D. - fellow researcher
Kaiser Jozef, prof. Ing., Ph.D. - fellow researcher
Kalasová Dominika, Ing., Ph.D. - fellow researcher
Kavková Michaela, Mgr., Ph.D. - fellow researcher
Makoveev Anton Olegovich, Ph.D. - fellow researcher
Maniš Jaroslav, Ing., Ph.D. - fellow researcher
Muchová Johana, Ing., Ph.D. - fellow researcher
Pořízka Pavel, doc. Ing., Ph.D. - fellow researcher
Průcha Lukáš, Ing., Ph.D. - fellow researcher
Radwan Rasha Mahmoud Mohammed, M.Sc., Ph.D. - fellow researcher
Slavíček Tomáš, MDDr. - fellow researcher
Šikola Tomáš, prof. RNDr., CSc. - fellow researcher
Šťastná Eva, Ing., Ph.D. - fellow researcher
Šťastný Přemysl, Ing., Ph.D. - fellow researcher
Tinoco Navarro Hector Andres, Ph.D. - fellow researcher
Trunec Martin, prof. Ing., Dr. - fellow researcher
Vacek Petr, Ing., Ph.D. - fellow researcher
Vojtová Lucy, doc. Ing., Ph.D. - fellow researcher
Zikmund Tomáš, doc. Ing., Ph.D. - fellow researcher

Central European Institute of Technology BUT
- responsible department (15.1.2020 - not assigned)
Central European Institute of Technology BUT
- beneficiary (1.1.2017 - 31.12.2019)

BŘÍNEK, A.; TESAŘOVÁ, M.; ZIKMUND, T.; KAISER, J. High resolution measuring with X-ray computed tomography. In Book of Abstracts CEITEC PhD Retreat II. Telč: 2017. p. 69-69. ISBN: 9788021085503.
Detail

TINOCO, H.A.; HUTAŘ, P.; MERLE, B.; GOKEM, M. KRUML, T. Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge tes. Key Engineering Materials (print), 2019, vol. 827, no. 1, p. 196-202. ISSN: 1013-9826.
Detail

Tinoco, HA.; Cardona, CI.; Marin-Berrio, MLF.; Garcia-Grisales, J.; Gomez, JP.; Roldan, SI.; Pena, FM.; Brinek, A.; Kalasova, D.; Kaiser, J.; Zikmund, T. Bio-structural monitoring of bone mineral alterations through electromechanical impedance measurements of a Piezo-device joined to a tooth. Biomedical Engineering Letters, 2020, vol. 10, no. 1, p. 603-617. ISSN: 2093-9868.
Detail

Tinoco, HA.; Cardona, CI.; Pena, FM.; Gomez, JP.; Roldan-Restrepo, SI.; Velasco-Mejia, MA.; Barco, DR. Evaluation of a Piezo-Actuated Sensor for Monitoring Elastic Variations of Its Support with Impedance-Based Measurements. SENSORS, 2019, vol. 19, no. 1, p. 1-16. ISSN: 1424-8220.
Detail

HOLZER, J.; et al. Development of The Bulge Test Equipment For Measuring Mechanical Properties of Thin Films. In METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings. 26. Brno, Czech Republic: TANGER Ltd., 2017. p. 1053-1058. ISBN: 9788087294796.
Detail

VARGAS, C.; TINOCO, H.A.. Electrical Performance of a Piezo-inductive Device for Energy Harvesting with Low-Frequency Vibrations. Actuators, 2019, vol. 8, no. 3, p. 55-69. ISSN: 2076-0825.
Detail

TINOCO NAVARRO, H.; BARCO, D.; BUITRAGO-OSORIO, J.; OCAMPO, O. Geometric Modeling of the Valencia Orange (Citrus sinensis L.) by Applying Bezier Curves and an Image-Based CAD Approach. Agriculture-Basel, 2020, vol. 10, no. 8, p. 1-12. ISSN: 2077-0472.
Detail

Tinoco, HA.; Durango, S. Tolerance Analysis of Planar Mechanisms Based on a Residual Approach: A Complementary Method to DLM. Mathematical Problems in Engineering, 2019, vol. 2019, no. 1, p. 1-13. ISSN: 1563-5147.
Detail

TINOCO NAVARRO, H. et al. Identification of Bone Density Changes Applying Impedance Spectroscopy with a Piezo-Device Coupled to a Human Tooth. Journal of Biomimetics Biomaterials and Biomedical Engineering, 2021, vol. 52, no. 1, p. 1-10. ISSN: 2296-9837.
Detail

BARCO, D.; TINOCO, H. A..; CARDONA, C. I.; PEÑA, F. M. Piezo-actuated device for a bio-structural monitoring application through vibration-based condition and electromechanical impedance measurements. IOP Conference Series: Materials Science and Engineering, 2019, vol. 657, no. 1, p. 1-7. ISSN: 1757-8981.
Detail

ŠŤASTNÁ, E.; ČÁSTKOVÁ, K. Electrospinning and biocompatibility of polymer-ceramic nanofibers for tissue engineering. In 10TH ANNIVERSARY INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH & APPLICATION (NANOCON 2018 (R)). 2019. p. 472-476. ISBN: 978-80-87294-89-5.
Detail

TINOCO NAVARRO, H.; HOLZER, J.; PIKÁLEK, T.; BUCHTA, Z.; LAZAR, J.; CHLUPOVÁ, A.; KRUML, T.; HUTAŘ, P. Determination of elastic parameters of Si3N4 thin films by means of a numerical approach and bulge tests. Thin Solid Films, 2019, vol. 672, no. 1, p. 66-74. ISSN: 0040-6090.
Detail

ŠŤASTNÁ, E.; ČÁSTKOVÁ, K. Influence of ceramic particles on bioactivity of the ceramic-polymer biocomposites. In Proceedings of the workshop for young ceramists. Bologna, Italy: Editrice La Mandragora s.r.l, 2018. p. 53-56. ISBN: 978-88-7586-599-3.
Detail

Responsibility: Vrba Radimír, prof. Ing., CSc.