Detail publikačního výsledku

Axial and Pressure Thrust Stiffness of Metal Bellows for Vibration Isolators

MACHÁČEK, O.; KUBÍK, M.; STRECKER, Z.; ROUPEC, J.; NOVÁK, P.; MAZŮREK, I.

Originální název

Axial and Pressure Thrust Stiffness of Metal Bellows for Vibration Isolators

Anglický název

Axial and Pressure Thrust Stiffness of Metal Bellows for Vibration Isolators

Druh

Stať ve sborníku v databázi WoS či Scopus

Originální abstrakt

Metal bellows are used as a spring element and simultaneously as a container (shell) for a damping medium in vibration isolators, especially in applications where any leakage is inadmissible. Dynamic behaviour of these isolators is affected by axial stiffness of bellows and by a resistance against axial deformation of bellows filled with fluid, which is in this article called pressure thrust stiffness. A method of the pressure thrust stiffness determination is discussed in this study. The method uses FEM model, which has been verified by stiffness measurement of a chosen bellows. Consequently, the sensitivity analysis of bellows dimensions to axial and pressure thrust stiffness was performed to find a dimension parameter of bellows which allows to adjust the ratio between axial and pressure thrust stiffness. Sensitivity analysis shows that the stiffness ratio of metal bellows can be adjusted by two dimensional parameters - mean diameter of bellows and corrugation width.

Anglický abstrakt

Metal bellows are used as a spring element and simultaneously as a container (shell) for a damping medium in vibration isolators, especially in applications where any leakage is inadmissible. Dynamic behaviour of these isolators is affected by axial stiffness of bellows and by a resistance against axial deformation of bellows filled with fluid, which is in this article called pressure thrust stiffness. A method of the pressure thrust stiffness determination is discussed in this study. The method uses FEM model, which has been verified by stiffness measurement of a chosen bellows. Consequently, the sensitivity analysis of bellows dimensions to axial and pressure thrust stiffness was performed to find a dimension parameter of bellows which allows to adjust the ratio between axial and pressure thrust stiffness. Sensitivity analysis shows that the stiffness ratio of metal bellows can be adjusted by two dimensional parameters - mean diameter of bellows and corrugation width.

Klíčová slova

metal bellows; axial stiffness; pressure thrust stiffness; vibration isolator

Klíčová slova v angličtině

metal bellows; axial stiffness; pressure thrust stiffness; vibration isolator

Autoři

MACHÁČEK, O.; KUBÍK, M.; STRECKER, Z.; ROUPEC, J.; NOVÁK, P.; MAZŮREK, I.

Rok RIV

2019

Vydáno

26.02.2018

Kniha

MATEC Web of Conferences

ISSN

2261-236X

Periodikum

MATEC web of conferences

Svazek

153

Číslo

2018

Stát

Francouzská republika

Strany od

1

Strany do

5

Strany počet

5

URL

Plný text v Digitální knihovně

BibTex

@inproceedings{BUT146173,
  author="Ondřej {Macháček} and Michal {Kubík} and Zbyněk {Strecker} and Jakub {Roupec} and Petr {Novák} and Ivan {Mazůrek}",
  title="Axial and Pressure Thrust Stiffness of Metal Bellows for Vibration
Isolators",
  booktitle="MATEC Web of Conferences",
  year="2018",
  journal="MATEC web of conferences",
  volume="153",
  number="2018",
  pages="1--5",
  doi="10.1051/matecconf/201815305005",
  issn="2274-7214",
  url="https://www.matec-conferences.org/articles/matecconf/pdf/2018/12/matecconf_icmme2018_06001.pdf"
}