Detail publikačního výsledku
Evaluation of the Surfactant Leaching from Alkali-Activated Slag-Based Composites Using Surface-Tension Measurements
BÍLEK, V.; KALINA, L.; BARTONÍČKOVÁ, E.; POŘÍZKA, J.
Originální název
Evaluation of the Surfactant Leaching from Alkali-Activated Slag-Based Composites Using Surface-Tension Measurements
Anglický název
Evaluation of the Surfactant Leaching from Alkali-Activated Slag-Based Composites Using Surface-Tension Measurements
Druh
Článek WoS
Originální abstrakt
This work tries to evaluatethe amount of surfactant leached from the AAS-based mortars using a very simple surface-tension (ST) measuring technique.Mortars based on AAS with and without2%ofPEGvarying in molecular weight (MW) were prepared. Waterglass with aSiO2-to-Na2O ratio equal to 2.0 was used at a dose corresponding to8%Na2O with respect to the slag weight. Mortarspecimens were prepared and sealed for 24 h, 3 d and 7 d. Then they were demolded and immersed in demineralized water,whose ST was monitored over time. During the early stages (from minutes to a few hours) the ST dropped rapidly, while itremained approximately constant after a few days, which indicates that organic molecules are leached from the AAS specimensvery quickly. It was observed that a relatively small fraction of PEGs can be leached out, which indicates that organic moleculesare rather bound in the matrix, unable to reduce the ST of the pore solution.
Anglický abstrakt
This work tries to evaluatethe amount of surfactant leached from the AAS-based mortars using a very simple surface-tension (ST) measuring technique.Mortars based on AAS with and without2%ofPEGvarying in molecular weight (MW) were prepared. Waterglass with aSiO2-to-Na2O ratio equal to 2.0 was used at a dose corresponding to8%Na2O with respect to the slag weight. Mortarspecimens were prepared and sealed for 24 h, 3 d and 7 d. Then they were demolded and immersed in demineralized water,whose ST was monitored over time. During the early stages (from minutes to a few hours) the ST dropped rapidly, while itremained approximately constant after a few days, which indicates that organic molecules are leached from the AAS specimensvery quickly. It was observed that a relatively small fraction of PEGs can be leached out, which indicates that organic moleculesare rather bound in the matrix, unable to reduce the ST of the pore solution.
Klíčová slova
Alkali-activated slag, polyethylene glycol, leaching, surface tension
Klíčová slova v angličtině
Alkali-activated slag, polyethylene glycol, leaching, surface tension
Autoři
BÍLEK, V.; KALINA, L.; BARTONÍČKOVÁ, E.; POŘÍZKA, J.
Rok RIV
2019
Vydáno
01.02.2019
Nakladatel
Institute of Metals and Technology
Místo
Ljubljana, Slovenia
ISSN
1580-2949
Periodikum
Materiali in Tehnologije
Svazek
53
Číslo
1
Stát
Slovinská republika
Strany od
33
Strany do
38
Strany počet
6
URL
Plný text v Digitální knihovně
BibTex
@article{BUT155606,
author="Vlastimil {Bílek} and Lukáš {Kalina} and Eva {Bartoníčková} and Jaromír {Pořízka}",
title="Evaluation of the Surfactant Leaching from Alkali-Activated Slag-Based Composites Using Surface-Tension Measurements",
journal="Materiali in Tehnologije",
year="2019",
volume="53",
number="1",
pages="33--38",
doi="10.17222/mit.2018.148",
issn="1580-2949",
url="http://mit.imt.si/Revija/izvodi/mit191/bilek.pdf"
}
Dokumenty