Detail publikačního výsledku

Study of Sintering of Ceramics by means of High-Temperature Dilatometry

MACA, K., HADRABA, H., CIHLÁŘ, J.

Originální název

Study of Sintering of Ceramics by means of High-Temperature Dilatometry

Anglický název

Study of Sintering of Ceramics by means of High-Temperature Dilatometry

Druh

Článek recenzovaný mimo WoS a Scopus

Originální abstrakt

The kinetics of sintering of ceramic materials based on alumina , zirconia and of their composites was studied by means of the high-temperature dilatometer. It was found that the alumina-based ceramics sintered at higher temperatures than those based on zirconia, that at a heating rate of 10C/min the resultant theoretical densities were comparable to those obtained at rates of 5C or 2C/min, and that the resultant relative densities were higher with materials prepared by cold isostatic pressing than with those prepared by injection moulding. With the alumina and zirconia-based materials, the values of linear thermal expansion coefficients were identical with those specified in the literature.

Anglický abstrakt

The kinetics of sintering of ceramic materials based on alumina , zirconia and of their composites was studied by means of the high-temperature dilatometer. It was found that the alumina-based ceramics sintered at higher temperatures than those based on zirconia, that at a heating rate of 10C/min the resultant theoretical densities were comparable to those obtained at rates of 5C or 2C/min, and that the resultant relative densities were higher with materials prepared by cold isostatic pressing than with those prepared by injection moulding. With the alumina and zirconia-based materials, the values of linear thermal expansion coefficients were identical with those specified in the literature.

Klíčová slova

alumina, zirconia, sintering

Klíčová slova v angličtině

alumina, zirconia, sintering

Autoři

MACA, K., HADRABA, H., CIHLÁŘ, J.

Vydáno

01.01.1998

Nakladatel

Institute of Chemical Technology in Prague and Academy of Sciences of the Czech Republic

ISSN

0862-5468

Periodikum

CERAMICS-SILIKATY

Svazek

42

Číslo

4

Stát

Česká republika

Strany od

151

Strany počet

8

BibTex

@article{BUT38969,
  author="Karel {Maca} and Hynek {Hadraba} and Jaroslav {Cihlář}",
  title="Study of Sintering of Ceramics by means of High-Temperature Dilatometry",
  journal="CERAMICS-SILIKATY",
  year="1998",
  volume="42",
  number="4",
  pages="8",
  issn="0862-5468"
}