Detail publikačního výsledku

Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; KOCÁB, D.

Originální název

Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

Anglický název

Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

Druh

Abstrakt

Originální abstrakt

This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurements

Anglický abstrakt

This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurements

Klíčová slova

alkali-activated slag, frcature test, mortar

Klíčová slova v angličtině

alkali-activated slag, frcature test, mortar

Autoři

ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; KOCÁB, D.

Rok RIV

2020

Vydáno

13.11.2019

Nakladatel

Technická univerzita v Košiciach

Místo

Košice

ISBN

978-80-553-3413-4

Kniha

SPACE 2019

Strany od

1

Strany do

1

Strany počet

1

Plný text v Digitální knihovně

http://hdl.handle.net/

BibTex

@misc{BUT160104,
  author="Hana {Šimonová} and Barbara {Kucharczyková} and Vlastimil {Bílek} and Dalibor {Kocáb}",
  title="Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand",
  booktitle="SPACE 2019",
  year="2019",
  pages="1--1",
  publisher="Technická univerzita v Košiciach",
  address="Košice",
  isbn="978-80-553-3413-4",
  note="Abstract"
}