Power-Efficient Electronically Tunable Fractional-Order Filter

článek v časopise ve Web of Science, Jimp

angličtina

This article describes a low-voltage, low-power fractional-order low-pass filter (FO-LPF) of order 1 + alpha, which is implemented using a voltage differencing differential difference amplifier (VDDDA). The VDDDA structure is implemented using the bulk-driven metal oxide semiconductor transistor technique. The transistors operate in the subthreshold region to maintain low-supply voltage and low-power consumption. The FO-LPF structure implemented using this VDDDA structure is compact. It includes three VDDDAs and three grounded capacitors along with two active resistors implemented using MOS transistors. In addition, this filter structure provides electronic tuning of its order and cut-off frequency through the bias current of the active component used. The effects of tracking error and parasitics on the functionality of the proposed FO-LPF were investigated. The VDDDA and filter operate at +/- 300 mV and dissipate only 207 nW and 663 nW of power, respectively. Thus, the VDDDA structure and filter are suitable for low-voltage and low-power operation. Layouts of the proposed VDDDA as well as the FO-LPF were designed in the Cadence Virtuoso environment. Post-layout simulation results of the designed circuits imply that they are suitable for fabrication. Noise, total harmonic distortion, Monte-Carlo, and PVT analyses were also performed.

bulk-driven technique; current-mode; electronically tunable; fractional-order; low-voltage; low-power; low-pass filter

TASNEEM, S.; KUMAR RANJAN, R.; PAUL, S.; HERENCSÁR, N.

2. 1. 2024

MDPI

BASEL

2504-3110

Fractal and Fractional

8

1

Švýcarská konfederace

1

24

24

https://www.mdpi.com/2504-3110/8/1/31

http://hdl.handle.net/11012/250111